Canfield Connector’s 5000 Series Sub-Micro connector is made to connect solenoid valves using the DIN Style “C” EN 175301-803 (Formerly DIN 43650) 8mm pin center, and the industry standard 9.4mm pin center. These standards permit industry interchangeability and have been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre wired at the factory. Wire connections are made inside the connector housing. The wire inlet is either PG7 or 1/2" conduit. Maximum current rating is 6 amps with a maximum conductor size of 20 gauge with an outer jacket not to exceed .260 inches diameter. Available in unlighted or with indicator lights depicting the “on” state. The connectors are NEMA 4 and IP 65 environment rated.