Products

Canfield Connector offers a wide selection of quality electronic devices. We specialize in interconnection devices, electronic timers, proximity sensors, modules and specialty electronic devices.  Our DIN 43650 solenoid valve connectors are the core of Canfield Connector and come in MINI, ISO and Sub-Micro 8mm or 9.4mm sizes, and both hardwired or fully molded versions to fit your needs.





Molded DIN 43650 Solenoid Valve Connectors

Field Wire DIN 43650 Solenoid Valve Connectors

Male DIN 43650 Solenoid Valve Connectors & Accessories

Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

CanGrip Wire Strain Relief Cord Grips

Tie Rod and Round Cylinder Proximity Sensors

Grooved Cylinder Proximity Sensors

All Threaded Magnetic Sensors

M8 Round Connectors

M12 Round Connectors

Double Ended Round Connectors

Timers and Electronics

Proportional Solenoid Drivers

Conveyor Controls

Condensate Drain Valves

Custom Assemblies

Sales Aids





Product Search
Name
Part Number
Functionality
Market


5K - Standard, Lighted, Suppressed, Non-Gasketed

The Canfield Connector Series 5K DIN solenoid valve connector all molded cord assembly offers a rugged one-piece design that is far better for environmental integrity than field wire solenoid valve connectors. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile "straight-line" interface/cord configuration allows for installation in many limited space applications. The Series 5K is different than the Series 5J version and is offered without the integrated gasket design in order to promote version compatibility as with the Canfield Connector Series MCCR and iLW. The Series 5K boasts an IP67/NEMA 6 rating when gasket is applied. The Series 5K as well as the Series 5F and Series 5J are the only molded valve connectors in the industry that feature a Hard Usage cord option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449), and is Proudly Made in the U.S.A.

MORE...

5F - Standard, Lighted, Suppressed

The Canfield Series 5F all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile "straight-line" interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request. The Series 5F is Proudly Made in the U.S.A.

MORE...

5J - Standard, Lighted, Suppressed

The Canfield Series 5J all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile "90°" interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5J and 5F are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5J connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request. The Series 5J is Proudly Made in the U.S.A.

MORE...

5JGT - DIN to Deutsch Adapter

The GatorMate™ brand of electrical connectors from Canfield Connector are as tough as their name. This fully molded Deutsch, Amp, Delphi connector line exceeds expectation. The over-molded 5JD mobile hydraulic DIN 43650 Form "A" to Deutsch DT04-2P Adapter/connector solution is designed for use with hydraulic valves to facilitate connection to the DT06 mating connector. The connector is available with indicator lights and surge suppression and unlighted black or grey housing for "A" and "B" solenoids. All standard voltages are available and the housing is IP67 environment rated. The product is designed to adapt DIN 43650 Form "A" solenoid coils to the Deutsch connector found in many mobile hydraulic solenoid valve applications. Proudly made in the U.S.A.

MORE...

5FFAC - Fieldbus, Lighted, Suppressed

The Canfield Series 5FFAC all-molded DIN solenoid valve connector/gasket/cord offer a completely molded plug and play design that interfaces female ISO (DIN 43650 Form “A”), MINI and 9.4mm (Industry Standard) and 8mm Sub-Micro (DIN 43650 “C”) solenoid connections to 8mm or 12mm (round) circular connectors. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating, is far better for environmental integrity than field wire versions and makes it impossible to lose the gasket! The 5FFAC and 5JFAC are the only molded valve connectors in the industry that feature bi-directional indicator lights and load suppression (not intended for UL 1449). UL and CSA versions are available as well. The Series 5FFAC is proudly Made in the U.S.A.

MORE...

5JFAC - Fieldbus, Lighted, Suppressed

The Canfield Series 5JFAC all-molded DIN solenoid valve connector/gasket/cord offer a completely molded plug and play design that interfaces female ISO (DIN 43650 Form “A”), MINI and 9.4mm (Industry Standard) and 8mm Sub-Micro (DIN 43650 “C”) solenoid connections to 8mm or 12mm (round) circular connectors as shown on the following pages. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating, is far better for environmental integrity than field wire versions and makes it impossible to lose the gasket! The 5FFAC and 5JFAC are the only molded valve connectors in the industry that feature bi-directional indicator lights and load suppression (not intended for UL 1449). UL and CSA versions are available as well. The Series 5JFAC is proudly Made in the U.S.A.

MORE...

5FR - Rectified, Lighted, Suppressed

The Canfield Series 5FR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5FR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC "hum" inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile "straight-line" interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features bi-directional indicator lights, and load suppression (not intended for UL 1449). The Series 5FR is Proudly Made in the U.S.A.

MORE...

5JR - Rectified, Lighted, Suppressed

The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC "hum" inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile 90° interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features load suppression (not intended for UL 1449). The Series 5JR is Proudly Made in the U.S.A.

MORE...



Search Our Site


About Us

Products

Engineering Information

Contact

Location



CANFIELD CONNECTOR

8510 Foxwood Ct.

Youngstown, OH 44514 United States

P: (330) 758-8299 F: (330) 758-8912

Toll Free (800) 554-5071